bearclaws8

Add ability to power off Rasperry Pi safely via PrusaLink

12

After installing PrusaLink I was unable to find a way to safely shutdown my Raspberry Pi while running PrusaLink. I did not see a way to do it via the...

Material Change Notification/Time Not Shown (non-MMU)

1

When printing on a stock printer with g code that has a material change Prusa Link does not provide a time until the change nor does it provide a notification...

Add Setting for 12 hour "Estimated End" Time

1

Current "Estimated End" time is shown in a 24 hour format, request ability to set time to a 12 hour format. _EDIT:_ I wanted to note that the time used...

[security enhancement] Enable installation without sending data to Prusa Connect/servers

6

To prevent user data being sent to external servers if the installation is intended to be local network only, or for users without an internet connection on the printers network,...

Add Profiles/Support for NPT or Other Tapered Threads

3

Is it possible to add support for NPT or other tapered threads (e.g. BSP)? I was not sure if it was possible for the current code to deal with a...