叶文轩

Add HLG Gamma for HDR metadata NotEnoughAV1Encodes is a very good software to encode some videos that take a large aomunt of space. Could the HLG Gamma be added to...

Nokia EA0326GMP型号的Kwrt固件于八月中旬后出现MTD device相关的问题。 小女子在8月5日在openwrt.ai上定制编译了一个适用于Nokia EA0326GMP路由器的固件，没什么问题 可8月25日至今编译的，都出现了“MTD device”“'ubi'is NAND”相关的报错 会导致的问题不明，可能的无法在线刷写固件问题。 ![Uploading error.png…]()

Can it convert to .pt or .onnx model?

1

Can it convert to .pt or .onnx model, I wana to deploy this AI model on embedded devices.

SDK更新的“Support hardware noise removal filter, which helps reduce CPU usage.(requires firmware v1.4.60 or above).” 如何在pythonAPI上启用

Why can't I find it on Vscodium? 嘤嘤嘤 It only can be installed as VSIX……

Hello, I really like this model. It's almost the only complete model I've found (the others only have weights) that can be converted to onnx format and deployed on embedded...

如何设置pipeline获取imu帧的配置

2

config = Config() pipeline = Pipeline() config.enable_accel_stream() config.enable_gyro_stream() config.set_frame_aggregate_output_mode(OBFrameAggregateOutputMode.FULL_FRAME_REQUIRE) pipeline.start(config) 如何设置imu采样速率之类的，手动设置到50hz，200hz之类的

as the title, i can not install taichi on my arm board(aarch64, rk3588) with pip. 嘤嘤嘤