叶文轩
actually they missed to upload it.................
use the 'libOrbbecSDK.so.2' in whl of arrch64 to replace the damage file in pyorbbecsdk/sdk/lib/arm64/ , then build again 
> sorry ,I will fix it immediately. if you have fixed it，you can close my pull request.
是自编译的还是用现成的wheel？
use the 'libOrbbecSDK.so.2' in whl of arrch64 to replace the damage file in pyorbbecsdk/sdk/lib/arm64/ , then build again 
是电脑还是开发板？
> You could configure it like this. The full-scale range depends on the device type, while the sample rate must be set for both the accelerometer and the gyroscope and...
请使用numpy版本小于2.0，或者把requirement里面的pybind11版本限制去掉，把pybind11升级到最新再编译pyobsdk
你的派供电够吗，试试拿5v倒灌usb口
请使用numpy版本小于2.0，或者把requirement里面的pybind11版本限制去掉，把pybind11升级到最新再编译pyobsdk english: Please use numpy version less than 2.0, or remove the pybind11 version restriction from the requirements and upgrade pybind11 to the latest version before compiling pyobsdk