TranHa-robotics
TranHa-robotics
@dusty-nv Thanks for reply i see, but i still don't know what to do. Can you tell me exactly what steps in order to run the csi camera inside a...
Have you [installed ros-noetic](https://wiki.ros.org/noetic/Installation/Ubuntu) yet? If yes, maybe you haven't setup your computer to accept software from packages.ros.org yet. Try this in your terminal: `sudo sh -c 'echo "deb http://packages.ros.org/ros/ubuntu...
Follow this instruction: [https://emanual.robotis.com/docs/en/platform/turtlebot3/sbc_setup/#new-lds-02-configuration-2](https://emanual.robotis.com/docs/en/platform/turtlebot3/sbc_setup/#new-lds-02-configuration-2) and choose the Noetic version near the top of page
Maybe this caused by time, try to sync time between two device ``` $ sudo apt-get install ntpdate $ sudo ntpdate ntp.ubuntu.com ``` and remember to `export TURTLEBOT3_MODEL=burger`
> Same issue. Fixed by updating ceres-solver from 1.14.0 to 2.1.0 Thank you, it worked
Hi, have you found the solution? I am facing that when i ran any TUM dataset