Min Tan comments

Results 16 comments of


                                            Min Tan

catkin_make error about fcl

I also encountered the same problem..T T, have you solved it?

Make error relocation R_X86_64_32 against `.text' can not be used when making a shared object; recompile with -fPIC /usr/local/lib/libccd.a: error adding symbols: Bad value

> I found out that the library was installed in a different path, so i included the path manually in the CMakeList.txt file > […](#) > On Wed, Aug 16,...

Using amp(fp16) cause "returned nan values in its 0th output." in backward

> > > when training with fp16 (using amp), `RuntimeError: Function 'BmmBackward0' returned nan values in its 0th output.` on Copy Generator module. > > https://github.com/OpenNMT/OpenNMT-py/blob/dfdd4554cf1c9327c2c249ab11a978efe72a93d9/onmt/modules/copy_generator.py#L127-L130 > > It works...

Data used for training and validation in the paper

I am also curious about the training and verification data because I found that these data are not included in the Endoslam provided.

rotation problem in UnityCam/Colon /pose

I found the same thing in the UnityCam dataset. May I ask if you have retrained the network of Endoslam? Have you reproduced good results?

rotation problem in UnityCam/Colon /pose

@Limiao813

RuntimeError: Function 'MmBackward' returned nan values in its 0th output.

Hi @JizeCao, Have you solved this issue? I also encountered the same question.

Training and testing pose

@JiawangBian And then what? Could you give me more advice? Thank you~

Training and testing pose

Hi, @hemangchawla Have you solved the problem? Could you give me some advice?

Training and testing pose

I have solved the problem, There is no need to reply to me, Thanks.