ThatRedMelon

Lunar Rover Instruments Don't Work When Using Hardware Rendering

1

Due to the fact that the LRV uses the function `MeshgroupTransform` in order to move the instruments, when using D3D9Client, where the function is not supported, none of the instruments...

[Please visit here for more details](https://github.com/googlecreativelab/giantemoji/issues/31)

As discussed on discord, the behaviour when switching the track mode switch to OFF may be incorrect. Some debate has ocurred on whether or not signal should be lost in...

At T-2:43 seconds, a check is performed here, to see whether to hold the launch or not: https://github.com/orbiternassp/NASSP/blob/d3d8e660b5f7b745c8a0037d8adc484c9d3248e7/Orbitersdk/samples/ProjectApollo/src_launch/LC34.cpp#L265-L277 The CutoffInterlock function then performs a set of checks as seen here:...

The command module optics provide a view through the origin of the vessel, instead of the actual optics position (see image below). This should probably be a special if case...