Stefano Semeraro

cannot reach luci through zerotier

2

There is something REALLY strange in reaching luci from zerotier. try to do so: ssh into your openwrt device from the zerotier network. Then send " /www/cgi-bin/luci". The connection drops...

How to migrate from default module to my own module

1

Hi all, thanks for this great library! I have started my project using the default module of tray (new AppPreferences(getContext())). Now i need to implement the auto backup feature of...

CB2S cannot flash, "Cannot get bus."

7

Hello guys, I'm trying to flash OpenBK7231N_QIO_1.12.0.bin on my CB2S I'm using a ft232rl USB TTL adapter. I have connected: RX -> TX TX -> RX GND -> GND I...

Receive one only retained message after multiple subscribes

5

Hi. I'm going crazy with this problem: in the onConnected callback I have multiple subscriptions (4 of them) with qos=2. All of the 4 topics have retained messages. The problem...

Full retransmit support for QoS1 and QoS2

7

Hi. I found in the readme: Limited: Not fully supported retransmit for QoS1 and QoS2 It's this still true? Can you confirm that this problem also affects lua port of...

Allow TTS notifications to also show as normal notifications

9

**Is your feature request related to a problem? Please describe.** When using Text-to-speech (TTS) notifications, only the voice is played, no actual notification is displayed **Describe the solution you'd like**...

DAHUA VTO: second substream same quality as main substream

1

Dear all, I noticed that the sub2 stream has the same quality as the main sub stream. How can I choose the lower quality stream?

⚪ Missing CCT support

20

With popular strip chips like FW1906 hitting the market with RGBCCT leds support and with WLED properly supporting CCT channel from version 0.15 we really need CCT support in python-wled...

REGISTER Expires not honored

2

Hi, i'm trying to connect to a SIP server configured to have SIP registration to expire after 60 seconds. ``` Headers: Via: [{'type': 'SIP/2.0/UDP', 'address': ('192.168.11.109', '34578'), 'rport': '34578', 'branch':...

client.loop() should return after ONE message received

1

I have this problem: I have a lot (about 10) topics that have retained messages. After connecting to the broker I subscribe to all of them in one call to...