Robert Hamilton

LORD gurus, I am experiencing this exact same issue. I left the WSDA-2000 active and receiving data from my G-Link-200-8G node. When I came in today I was unable to...


Yes it is working at the moment, due to restart. I have upgraded the WSDA-2000’s OS version and will let it burn a few days to see if it re-occurs....

@mglord Ok, I have it doing this again after updating the WSDA-2000's OS yesterday. I had it running all night with the SensorConnect software graphing the results, looks like it...

@mglord After doing a little more research with the cyclePower() method, it turns out that even after just restarting and everything working correctly, it actually does not cycle the power...

@mglord Here is the log file. I also sent it via email. [WSDA_W020000000090355(2021-03-03_23-16).zip](https://github.com/LORD-MicroStrain/MSCL/files/6618558/WSDA_W020000000090355.2021-03-03_23-16.zip)

@mglord Okay, I had it re-occur again this time was only after 3 hours. I also noticed that if SensorConnect had already mapped the base station that it would crash...

@mglord So this time when it locked me out, I connected to it with a simple TCP/IP client. I received a steady stream of data, but I do not know...

@mglord When it locks up it is running WSDA-2000 base with a network of one G-LINK-200-8G. Only actual software that is connected at the time is your SensorConnect software, so...

@mglord I do believe it has. I will start it tonight and then disconnect SensorConnect application, test it periodically to try to reconnect and see what happens.