K4KDR
K4KDR
Hello! It has been a while since I bothered you. I am attempting to help a Project Team that is having success with 1k2 FSK from an SX1268 module using...
More of an FYI than an 'issue' or problem... While decoding the AX100 downlink from GreenCube, I was of course using the 'Telemetry Submit' block to upload to SatNogs. My...
Running **v1.1.4-c6a7dc70** on Ubuntu 18.04..... No doubt I'm overlooking some obvious mistake on my part, but in the **Recorder** tab, down in the **Tracking** section, when I click the **Horizons**...
Thank you SO much for making this available!! Regarding the "32-bit complex float samples" as input... would an example of the required input be the 32-bit .RAW format that **GQRX**...
With a working 1W custom ESP32/LoRa board now (thanks to you & Bob-N6RFM!), I noticed that the default tinyGS "Power" parameter (5 dbm) did not take advantage of this device's...
Hello! After finding success w/ the LoRaWAN examples using my Arduino UNO + sx1278 hardware, I wanted to be able to utilize the excellent **Waveshare SX1262 LoRa Node Module for...
Unable to run either **tianwen1_hsd.grc** or **tianwen1_hsd_shortframes.grc** on Ubuntu 18.04, GNU Radio 3.8, Python 3.6.9; both show the following errors in the 'Symbol Sync' block: ``` Param - Filterbank Arms(nfilters):...
Hello! Am all setup & anxious to decode as many OPS-SAT packets as possible with the time remaining. However, after not seeing ANY signals the past two nights over the...
Would you please let us know what version of **GNU Radio** should be on the system running this application? Thank you in advance! -Scott, K4KDR
Could you please make available sample audio files for us to test the beacon & telemetry packet decoders? Thank you and best wishes for success with your satellite! -Scott, K4KDR