K4KDR

Thanks very much for the reply! I did question whether the team had provided adequate audio output bandwidth for 9k6 when creating the sample file and was assured that they...

I've seen general publicity about the satellite, but don't know if the team has released frequencies and a list of downlink modes yet. So, I should probably not post on...

Don't know if it's helpful, but here is how I time-stamp telemetry decodes in Direwolf (9600 baud .conf file in this example) -AND- write the same data to a text...

Thank you SO much for the detailed reply!! I will get to work testing both with GNU Radio and also with your sample files. Both sets of instructions are very...

Thanks again for the great help! Regarding the 'output' file option, what **format** does that produce, exactly? Or perhaps asked more directly, once I run a command such as: `./ccsds-tool...

Oh that is a HUGE help - thank you! Many of us have only had dealings with packets that were either in AX.25 format with 'Source' & 'Destination' Amateur Radio-style...

Thanks a million! Will read through that word-by-word. Appreciate you taking the time to do that!

Have noticed the same thing & thought perhaps that the button had to be pressed at some exact point and/or for some exact duration. However, have not yet found the...

Since this (a number of trailing bytes to remove) can vary from satellite to satellite - plus there could be other parameters that are specific to only one satellite, is...

Schematics for a number of the T-Beam versions are at https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series#product- ... and the flashing red LED near the GPS antenna, while it can take a LONG time to activate,...