DrKlipper

{date.created} - how do I get a user readable form?

3

Hi ! Using this `` results in a very strange datetime output:  I think it´sthe epoch date or something like that ... Anyway ... Is there an option to...

Compiling stlink with Rapsberry Pi fails for v1.8.0

1

Hi ! When you try to compile stlink 1.8.0 on a Raspberry Pi you get the following error: ``` pi@Pi4Test:~/build/stlink $ make clean && make release && make install [CLEAN]...

Controlling RC Servos?

3

Hi ! Maybe I missed it, but is there any way of controlling RC Servos? I´m planning an Pen Plotter which uses a rc servo to move the pen up...

Board shuts down completely under load

6

### Variant USART ### Control type FOC ### Control mode Torque ### What is the bug and how to reproduce it ? Hi ! I'm sorry, but I have another...

Motors stutter and go off while driving

3

### Variant USART ### Control type FOC ### Control mode Voltage ### What is the bug and how to reproduce it ? Hi ! I'm just building a "driveable beer...

Flashing over "pure" serial connection (Creality 4.2.7 board)?

12

Hi ! Just installed Katapult on a *Creality 4.2.7 board* with the deployment method. This worked for me. I triedy to flash Klipper and I hoped to use this call...

Connect problems with Gamepads (Authentication Failed)

20

Hi ! I use a Raspberry Pi Zero 2 which has embedded BT. I want to connect a little gamepad: This one : https://www.amazon.de/auvisio-Gamepad-Bluetooth-Mini-Akku-Game-Controller-Fernbedienung-black/dp/B0179P8WMG It´s working in Windows like a...

[Errno 121] Remote I/O error - AHT25 Sensor

1

Hi ! I try to write some python code for reading the AHT25 sensor. The sensor is nothing special - only a humidity / temp sensor. It´s connected to the...

[Errno 121] Remote I/O error - AHT25 Sensor

2

Hi ! I try to write some python code for reading the AHT25 sensor. The sensor is nothing special - only a humidity / temp sensor. It´s connected to the...

Serial Flashing broken: Error sending command [SEND_BLOCK] to Can Device

28

Hi! Just tried to flash a Manta M8P (V2.0) with Katapult / Klipper. It uses a STM32H723 controller. Compiling and flashing Katapult was no big deal. And since I enabled...