DrKlipper

Just a side note ... Installed Retropie on the Zero2w. It uses bluez 5.50 with Kernel 5.10.103-v7+ (Debian Buster). It works without any issues. No key is required at all....

Ok I found a strange workaround. But to be honest, I don't know if this is a real workaround or "works as expected". Anyway ... Here is what I can...

Maybe this issue should get a bug tag assigned ?

Ok an update :-) Tried to compile 5.72 (last commit) and this commit (d994c9d45dad68bc060add77642fdc37834cd7c1). Last one fixed an authentication error / binding error fpr PS4 / PS5 controller. But getting...

> Most drivers supports this Oh, that is great to know. And which gcode commands will control this? Is it M3, M4, M5 like for Lasers?

I selected serial as com interface: ``` Micro-controller Architecture (STMicroelectronics STM32) ---> Processor model (STM32F103) ---> [ ] Only 10KiB of RAM (for rare stm32f103x6 variant) [ ] Disable SWD...

> Once you have verified that the stock bootloader is indeed not functional the next step is to attempt to program Katapult directly. Oh, maybe you got me wrong. The...

**Update** Ok, just cleared the whole flash and flashed Katapult with my ST-Link. Attached a LED to Pin PB14 and Katapult worked. LED is blinking und flashing Klipper with this...

Just dig a little deeper and think I found the problem. First of all I reinstalled the stock firmware (complete flash with stock bootloader and Marlin) with my ST-Link. Then...

Ok using an extra wire for the deployer could be a solution. > We can't erase all flash after Katapult as it would result in the deployer deleting itself. Got...