AJ6GZ

Perhaps we could come up with a few preset "modes" or templates depending on common end user scenarios. Here are a few I came up with. Traditional/PoE WAN LAN LAN...

Agreed, with good documentation (and examples) truly advanced scenarios may be best handled swconfig edits. And perhaps that single "change behavior of one port to something else" button.

Remember, having all ports LAN untagged would result in DHCP conflicts when a 2nd/3rd+ node is connected. On Sun, Feb 5, 2023 at 5:23 PM Ciaran Farley ***@***.***> wrote: >...

Seeing the phantom -4 listing on a Nano XW 2Ghz, but little energy even in this heavily polluted RF environment. 5MHz wide here as well. 

I tested a hAP ac lite, Mikrotik BaseBox2, NSM2 XM and XW against each other at 5MHz. Power lowered, all running at the same time, and various combinations of powered...

[4-node-5Mhz.zip](https://github.com/aredn/aredn_ar71xx/files/2706411/4-node-5Mhz.zip) Here is the support data from a second test again with the 4 nodes. This time only the two MikroTik seemed to connect, though the XM NSM2 tried but...

[4-node-5MHz-lowered-power.zip](https://github.com/aredn/aredn_ar71xx/files/2706417/4-node-5MHz-lowered-power.zip) And again the same test with power set at 19dBm across the board. The BB2, normally high powered on 10Mhz and works fine, connects to all. hAP only connects...

The Winlink program needs a full URL to be able to find, and correctly, populate its server list. Mine is: winlink://AJ6GZ-1-winlink.local.mesh:8772/ So the values are: Name: Winlink Post Office (The...