Odin
Odin
I'm playing around with and Arduino and the HP Designjet Chip. Reading is working well. What do I have to do to try to decrypt the HEX-File with the uprintSE...
Oh, I was thinking it is a SE Clone. Thanks for your Analysis. This means, there are no differences in the cartridge. So normaly the uPrint cartridge can be used...
A, good idea with the unknown Material. I will try to get some Dumps of an uPrint Chip. Once more .... Thanks to you.
Here I'm back again. I recieved the DRD-Chip from Bolson and managed to read it out. Initial read worked well. Also the printer recognized the Chip als 922ccm. But after...
Sorry, forgot to add the UID b30948e1d0141010
Some more dumps of the HP DesignJet Chips; Material is unknow Filename = UID (reverse) [1e1014d006dcbbb3.bin.txt](https://github.com/bvanheu/stratasys/files/568541/1e1014d006dcbbb3.bin.txt) [d31014d00b1c4bb3.bin.txt](https://github.com/bvanheu/stratasys/files/568542/d31014d00b1c4bb3.bin.txt) [621014d006fc39b3.bin.txt](https://github.com/bvanheu/stratasys/files/568543/621014d006fc39b3.bin.txt) [a01014d006b033b6.bin.txt](https://github.com/bvanheu/stratasys/files/568544/a01014d006b033b6.bin.txt) [931014d0086a33b3.bin.txt](https://github.com/bvanheu/stratasys/files/568545/931014d0086a33b3.bin.txt)  and finally one dump of a support [d71014d0086c11b3.bin.txt](https://github.com/bvanheu/stratasys/files/568548/d71014d0086c11b3.bin.txt) With...
I finally managed to re-write the 100% dump back to the EEPROM of the HP. But this means that it is neccessary to delete the file with the stored serial...
Hi, i've found no solution for rewriting the eeprom with anything other than via DIAG port. I heard that maybe there will be an opportunitiy in the next weeks.
Thanks for the flowers, but nealy nothing of this was found out by me. :-) Take care, that the eeproms will have at least 1% left. If it is empty...
Hi Belencsakl, unfortunately I did not succeed in finishing an emulator for the uprint. If your EEProm is wrote protected your only chance is to buy a new one. To...