BoxZero
BoxZero copied to clipboard
zruncho3d
Simplify, strengthen, and seal your V0/T0/ X0 by ditching the tophat and moving to a full-box frame.
It's honestly not a big issue as you still end up with all the right printed parts, it just caused me a bit of confusion when I went to slice...
Reported by DrawnToLife on Discord: sorry - now that I've done most of the conversion (A/B blocks built, extrusions swapped out, just putting the gantry back together now but idlers...
The holes needs to be moved up by 0.865mm. 
If you could publish the CAD files for the upper mini frame blocks it would be hugely appreciated. thanks in advance!
Prusaslicer ver. 2.4.2, 0.2mm layer height, Layer 283 (Z 56.6) there's a little floaty bit where the screw holes begin bridging together.  I *think* if you either size-up or...
Whilst slicing, it is shown that the bridges for the slot holes are not on a flat plane, which causes issues when bridging and printing. Nothing that can't be fixed...
