Laura Hausmann

I just tested the latest IamForce version (I saw that you updated the link a few times) and sadly the same issue (force logo but boots into MPC mode) arises...

the journal shows the following (this is an MPC Live 2), maybe this is helpful: ``` Feb 15 21:25:06 mpc-live-ii az01-launch-MPC[363]: / # / # [tkgl] **** Error : MPC...

If I understand the logs and the config file correctly, the mapping fails because the config doesn't contain the live2 button/led IDs, I'll try to figure those out now Edit:...

Alright, I got it to work! Fixed all the button mappings that i could find. PRs: #31 and https://github.com/TheKikGen/MPC-LiveXplore-bootstrap/pull/3

Yep, I got it working! I don't have FB, I'll upload a picture here in a moment. To get it working I had to modify the regex in the mpcmapper...

There we go: 

@TheKikGen tested with and without the force sdcard, seems to be identical: ``` root@mpc-live-ii:~# amidi -l Dir Device Name IO hw:1,0,0 MPC Public IO hw:1,0,1 MPC Private IO hw:1,0,2 MPC...

``` root@mpc-live-ii:~# aconnect -l client 0: 'System' [type=kernel] 0 'Timer ' 1 'Announce ' client 20: 'MPC Live II' [type=kernel,card=1] 0 'MPC Public ' Connected From: 136:0 1 'MPC Private...

@TheKikGen there you go :)

I am facing the same issue. Logs: ``` 2021-10-27 17:34:06.540 T:2004 ERROR : CCurlFile::CReadState::FillBuffer - (0x7f2bd0ecb2e0) Failed: Stream error in the HTTP/2 framing layer(92) 2021-10-27 17:34:06.540 T:2004 WARNING : CFileCache::Process...