zhgzhg

Hello, @nicolasdauy , At the current moment downlink packets are not supported. ACKs are received and used, but right now only for uplink packets. There are plans to implement the...

Hi @Di-Ny , I am still validating the changes (hence didn't update this ticket), but you are welcome to give them a try :)

Timing issues could be the most likely reason for not receiving downlinks. Currently I am investigating how much of them may be caused by the forwarder. Regarding RX2 / RX1...

The "sometimes" is totally expected, because it's just a single transceiver, and hence I doubt switching to SX1262 will make any difference. What's interesting though is the OTAA's "no more...

@ivan-avalos , I've seen SPI connectivity issues with some transceivers and Orange PI boards, but usually they are unable to communicate at all, instead of stopping randomly. (In my case...

I've looked at your sketch and library. The modem config is effectively: ``` 0x72 - regmodemconfig1: 0111 = 125khz BW 001 = 4/5 CR 1 = implicit header 0x74 -...

I'm also having issues receiving the data from my Transmit example. I'm looking into that as well...

@ivan-avalos , the Transmit example should be fixed now, and if it's working for you, I hope we can safely exclude the transmission part out of the equation. Edit: On...

Hi @isouriadakis , To increase the verbosity of the packet forwarder you can recompile it with `make debug`. Additionally you may add `-DRADIOLIB_VERBOSE` to the CFLAGS line in the Makefile...

Weird indeed. At first glance it looks okay. How is the transmitter node implemented - is from the [Transmit](https://github.com/zhgzhg/LoRaPacketForwarder/tree/master/Transmit) example? It's important when the node is about to transmit to...