Sasha Zbrozek

Results 6 comments of Sasha Zbrozek

C62 and C67 are too large and cause too-slow crystal start to use system bootloader in DFU mode

@mqt0029 This is only relevant if you're trying to use the DFU bootloader, which is unlikely if you're thinking about OctoPi. Also presumably you meant the USB-B connector?

Overhang handling suggestions

I'm struggling to print some parts in ABS that have overhangs right now. In particular I would *love* to have overhang-dependent fan speed. My parts are super brittle if I...

Tree supports

I just read [this](https://all3dp.com/2/cura-tree-support/) and now I covet them too.

readme should warn about Influx API version

I ended up unable to get things working with the v1 API, so I just edited the code and now it's using the v2 API and is working properly. It's...

Support non-DMA DRAM & fix create_elf bugs

I used this PR yesterday and it worked nicely; thank you! Would be lovely for it to be merged.

Internal error during connect: ProbeSessionHelper.__init__() missing 1 required positional argument: 'start_session_cb'

Would be lovely if these fixes got merged!