Radek Zajic
Radek Zajic
Hello, while attempting to change the IPv6 network configuration using MeshCommander, I only get a pop-up window with the following error: `Unable to set IPv6 state, error 400` When I...
Hello, I have tried to connect to Intel AMT via IPv6. When I add a computer in MeshCommander and type the IPv6 address into the Hostname field, then save the...
Hi all, considering the last commit was some 2 years ago, this issue is logged just to keep the evidence for others potentially seeing the same issue. From time to...
For `PCR[5]` hash calculation in UEFI, the following components are used: - `EFI_PARTITION_TABLE_HEADER` (92 bytes on its own) - `UINTN` (32 or 64 bits, based on the UEFI architecture) -...
This commit adds a very basic EFI romheaders support. It also prints a short comment on code type 0xff, which is being [used by iPXE](https://git.ipxe.org/ipxe.git/blob/HEAD:/src/arch/x86/prefix/mromprefix.S#l507).
Hello, thank you for all the amazing work and effort spent on http://hwraid.le-vert.net/ I have recently run into an issue with the latest available `arcconf` tool (`Source: arcconf-2.02 (1:2.02.22404-1)`, package...
In Debian, if you bring up dual-stack interfaces, the pre/post-up/down scripts are run on the configuration of each stack. I.e. if you bring up the IPv4 config on an interface,...
Hi Cloudflare, first please let me thank you for your code. It is really amazing. We at Showmax are using it and have found an issue (a corner case, if...
Hi everyone, I have encountered a bug where the official Mongo image does not properly enable MongoDB to listen on IPv6 address(es). I have tried two cases: - default setting...
Hello, this might not be an issue with Jool, rather a description of an issue we're seeing, with the hope that there's an option we've missed. There are hosts in...