yucandu

Thanks for these comments guys, I was pulling my hair out trying to figure out why my code no longer worked on my ESP32-C3, just reboots forever. It was a...

Did you ever figure it out? I have perfect drift-free outputs on the official Pololu code, but it's very slow, noisy, and laggy to respond to movements. This guy's (mikeshub)...

Just had this issue on my new C3, does anyone know if the fix breaks support for the other boards?

The "Display Example I2C" board config is broken. Do not use it. Instead, under the "deauther config" menu, select the default "NodeMCU" at the top, and then in A_config.h, manually...

I have the fix. The "Display Example I2C" board config is broken. Do not use it. Instead, under the "deauther config" menu, select the default "NodeMCU" at the top, and...

Download dfu-programmer-win-0.7.2.zip from here: http://sourceforge.net/projects/dfu-programmer/?source=dlp Then go into the dfu-prog-usb-1.2.2 folder inside the zip, then copy those contents to UnoJoy-master\Drivers\Windows and replace the files that were there before, then you...

I've tried this on all the various ADS1115 modules I have, on an ESP32C3. Correct, the only difference is changing libraries, and suddenly the current properly drops to 0 after...

> Try with these. Extract and copy the files to "..\Arduino\libraries\TFT_eSPI\Processors" . Recompile and upload. (make sure to save a copy of your original files first, just in case) >...

I don't think this works anymore on ESP 3.x. My projects with it just core panic and boot loop. I've switched to Wollewald's library instead.