yardi83
yardi83
So i changed some things that you mentioned @markniu e.g. home speed to 5 (with 6 i got same error on homing again) Also horizontal_move_z from 2 to 1 which...
When (and why?) exactly do i have to calibrate again?
> > When (and why?) exactly do i have to calibrate again? > > For example if the motor is unlocked before calibration the zero position maybe changed while doing...
okay with Z at 0,10mm i still got bad results from calibration but with 0,20mm i got that > 12:17:22 452 12:17:22 467 12:17:22 525 12:17:22 564 12:17:22 602 12:17:22...
Started a print and the nozzle is digging into the bed when the print is starting I`m done for now...
Can i still do babystepping over the web ui or klipperscreen?
With adjusting Z Offset values back and forth in printer.cfg i got one good print with a nice first layer but the next one wirhout changing anything and same GCode...
> > With adjusting Z Offset values back and forth in printer.cfg i got one good print with a nice first layer but the next one wirhout changing anything and...