J Posthuma
J Posthuma
> I just bought one of these boards with the tft35 display. I have been reading up before getting too far, but I read that you can not actually use...
Very nice! Thanks! I’m using the Ubuntu font.
I thing the connections from the TFT35 isn't stable enough for printing. Had the same issues, also then I pickup the TFT it restarts the printer, so there are some...
I guess it's because the SD card isn't initialized on start. I'm using both the TFT35 and the Smart controller LCD, but I just print from the Smart controller LCD...
Hi @melufre Here are my current config files: https://github.com/xoniq/Marlin/tree/SKR1.3_TMC2130/Marlin
If you can see it on the PC, it means the PC mounts the card, not the board itself. With no PC attached and only a screen, I have to...
Gcode: http://marlinfw.org/docs/gcode/M021.html Make sure you have enabled that Marlin should use on-board SD by default.
Anything on this? Still cannot het hi textures to work. With both Zelda and Mario. (Correct hi textures folder names) (Am using GLiden64, will try with RICE) // EDIT //...
I think this project died a bit. Last interaction since february. Also need something like this.
Got the same error, don't no where this comes from.