xiaole51

This is a very needed function, batch exporting and sharing links should be realized, at least with CLI.

DM500S can implement S to C by modifying the bootloader I have successfully changed S to C (bsbe1-702b to CU1216LS) cat /dev/mtd/2 > /tmp/dm500s.img edit this img use hex editor...

This method has already been used here I drew the lines. I have no schematics of the DM500C/S But this method has proved to be effective. It's not too difficult...

> @ xiaole51 > can you help me how to make dm500c to work? Do you have any questions do not understand it? I have shared all the transformation methods.

I can't understand your intentions. I share the method of transforming DM500S to DM500C. However, the jmendeth/dm500-satip firmware cannot support the tuner of DVB-C. And this project has been abandoned....

Trying to compile minisatip on dm500 will be more valuable. I have tried to compile, but the C library version is too old, so I can't pass. minisatip can work...

You have to understand first, This method compiled con't work in general DM500 firmware. I have compiled it, you can try it. https://drive.google.com/open?id=11oIS1e5lFWumLLLfvFzPKer-oAgFOW62

I also use the clone DM500S flash 2.3 img. can load web page and tvhedend to show tuner. But no signal was received I haven't figured out how LNB is...

hi Barracuda09 Libdvbcsa installed and compiled successfully But what protocol does OScam prot use? Unable to connect to oscam hi kartu I'm learning to cross-compile with Buildroot. But don't know...

Hi kartu Can share the compiled satpi files, used in E2 system I tried compiling, but it was too difficult for me. I am using DM800se, Thank you very much...