xcray
xcray
> @xcray I see you have quite some experiance with the Xiaomi Miio protecol since you wrote a CSharp implementation. Do you have any ideas on how to obtain the...
另外，pcap-decrypt.py存在瑕疵，在我的环境下运行报错。原因是把小米手机上的米家客户端发出的21310020fffffffffffff判断错误，把fffff当成token并试图解密。 解决方法：在第99行插入 if token == b"\xff" * 16: continue
> https://github.com/jptrsn/ESP32-mqtt-room > Does almost the same Nope. The repo you mentioned is just a beacon presence detector, almost the same as esphome ble components, witch can not support smart...
@XingKongSync pls check this repo: https://github.com/dansonskywalker/esp_ble_tracker it's not a porting of monitor script, but could track ios devices by esp32.
> @XingKongSync, @xcray > Apologies for the delay, life suddenly had other plans for me... -_-' > > It took some additional effort to get it to compile on a...
这个权限是被安卓修改的吧？不少教程都强调在reboot update那一刻再把U盘插入，避免权限被修改。不过我好像没碰到过这个问题。可能跟原有的安卓固件有关系？
哦，5.15原来是f大修改过的，怪我之前不了解。 另外，看来那个e900v22c教程属实该更新了
最可恨的就是有些不完整版主线uboot（overload）在u盘上启动没问题，写到emmc就起不来！如果用ttl观察，很可能是不认emmc。 这个问题的可恨之处在于无法事先发现。 如果出现了这种情况，也不用重新线刷，把含有系统的u盘插上重新开机，还是可以起来的，甚至很可能起来后根系统还是emmc。这时候把内核切换到5.9-就可以了。 即便起来后根系统不是emmc而是u盘，也可以修复emmc的boot分区（还是换内核），而不用再完整地写一遍emmc。头和模块啥时候替换都行，或者重启后再切换一下内核。
not only happens on iOS, but also on windows with edge browser (and chrome).
mmc的设备名称不是mmcblk2，也许没识别、也许是另一个名称，看下/dev目录、dtb文件，可能需要修改脚本或dtb