wspitts2

You have the following link in your readme: For more information and updates: http://alexforencich.com/wiki/en/verilog/cam/start However, there is nothing there. Are there any instructions for how to run this?

GPL-3.0 License failed precheck, it identifies as AGPL-3.0 (which it isn't)

1

We would like to use GPL-3.0 License but it fails the precheck saying that AGPL-3.0 is prohibited. We used the following GPL-3.0 license file (we obviously called it LICENSE): https://github.com/efabless/mpw_precheck/blob/mpw-5c/checks/license_check/_licenses/_approved_licenses/GPL-3.0.txt...

sky130_tech/tech directory missing only tech

4

The sky130_tech directory doesn't exist. only the Tech directory. ./configure --enable-sky130-pdk --prefix=$(PREFIX) make cp: cannot stat '../sources/klayout_sky130/sky130_tech/tech/sky130/lvs/*': No such file or directory cp: cannot stat '../sources/klayout_sky130/sky130_tech/tech/sky130/pymacros/*': No such file or...

I followed your example on the blog post here: https://hackaday.io/project/185019-boxlambda/log/213139-openocd-tying-up-loose-ends I had to update a few things and set it to work with the ARTY A7 100T (since the 35T...