Wolfgang Klenk comments

Results 7 comments of


                                            Wolfgang Klenk

Resource busy

WiringPi has nothing to do with the issue. This GPIO support by means of a directory structure is provided by the Linux kernel. You get the error message "write error:...

Modem does not compile

I did not (yet) port the "modem" example from stm32 platform to Raspberry Pi. The compiler tries to look up hw.h in the Raspberry Pi HAL implementation directory, but it...

persist the JOIN credentials, join once

Hi, some comments from my side: > to my surprise, I had to make sure we send packets slower than one per two seconds You should know that public LoRa...

Fork with subband and Australian frequency support

Thanks for this hint. Can you generate a pull request?

No lora, No GPS fix

Sorry I never tried out the GPS functionality, but as you already read at the dragino.com site, it seems somehow complicated to get it working on version 3 of RPi....

No Join Received

You wrote you do use a LoRa Hat 1.4. In Version 1.4, the output lines DIO0, DIO1 and DIO2 should already be correctly wired to the Raspberry Pi GPIO pins....

Connection with a Kerlink Gateway

Hello, good to hear from someone using this stuff. Unfortunatelly, I don't quite understand what your problem is: You can see a "JOINED" debug message, so everything should be okay....