William Makinen
William Makinen
Same problem, however it is with Repetier Server at startup. I can't ever even get to the point of basic movements, as the printer never becomes properly connected. It happens...
> I ran the identical peripheral example using a BBC microbit and this correctly returns the value 2 (as in, there are two descriptors present for that characteristic 2901 and...
I see - any suggestions on how to fix the descriptorCount() function? Otherwise I'm going to order an ESP32 and be done with this :/.
Alright, so it seems that my issues are a combination of BlueFruit and ArduinoBLE incompatabilities. Debugging the library is unfortunately a bit past the scope of project, since it's due...
Harvie, any updates in the last 4 months? Even if the design isn't fully validated I would love to see the KiCAD files and/or see a schematic, since I would...
This is great, I'll have a look at it and let you know my thoughts and if I have any questions
Harvie, I'm confused about the purpose of this IC in the schematic. None of the components attached to it appear in the PCB file. Additionally, what's the difference between the...
That makes sense. Where in the PCB file is the BFR193 Q4? Only the Si2301CDS Q3 is present on the current layout.
Another question, what is the inductance of the microstrip inductor (squiggly trace), and the parameters of the rectangular antenna traces? Also, what frequency does it oscillate at?
Thanks. A final thing I was curious about was the choice in corner frequencies of the op amp bandpass filter - after simulation they seem to be around 100Hz and...