wichjan

I’m highly interested in an integration of XyJax too … Is there any chance of an future update getting this done? Would appreciate a short answer. Thank’s!!

Thanks for the prompt answer! Well, in fact I already took a look at the code, but I have to confess, I didn’t even see where/how you managed the integration...

@faro1219: I would appreciate the integration of xyjax too … tried to get into the source code of _Extended MathJax_ but failed. As a temporal workaround I do the commutative...

If this is still of interest: The right connector is the JST-GH 1.25mm 2PIN Tested and used by myself. By the way: @M5Stack-Support: Your help here on github is needed!!!...

Hi [DevDianDankie](https://github.com/DevDianDankie), this port is **only** suitable for single cell Lithium-Ion/LithiumPolymer batteries (1S-LiIon/LiPo) with the nominal voltage of 3.7 V (max at full charge 4.2V), as the port is directly...

Right. »B+« is the plus pole of the battery. There is no standard amongst the battery manufacturers, so you will find batteries with the red (+) and black (-) wires...

@Rob65: Have you tried the encoder.h and encoder.cpp-Version of MitchBradley (see issue #8)? This alternative to the M5Stack-Encoder-driver uses the ESP32 PCNT hardware – no need for interrupts. Under MacOS...