Peter Whisker

I am getting more reliable capture and decoding with a pulse length of 10: rtl_433 -R 0 -f 868.298M -X 'n=Marlec,m=FSK_PCM,s=10,l=10,g=1000,r=2000,preamble=aad391d391' -s 1000000 I changed the marlec_solar.c module locally to...

# rtl_433 -f 868.297M -vvv -R 0 -X 'n=Marlec,m=FSK_PCM,s=10,l=10,g=1000,r=2000,preamble=aaaad391d391' -s 1000000 2>&1 | grep Exact Exact sample rate is: 1000000.026491 Hz General purpose decoder 'Marlec': Exact bit width (in us)...

This is the version I have (pics) :  

I have tested it on the few DAB+ UK broadcast channels (usually 32k HE-AACv2) and it does not work on them either. I use an rtlsdr. I also run odr-dab...

I have compiled on Debian testing (Bullseye) against the latest libraries and have tried master and next versions of welle-cli as well as both FT libraries but in general it...

Hi Ok, I rebuilt this on my raspberry pi 4B (4GB) and it works OK. Strange. Incidentally the PI can cope with encoding 10 channels and running dab-mux as well...

This is probably the same as #10828 which I reported on my Lantiq device (BB HH 5A). Yes the issue is PPPOE over dsl0.101 (UK's BT FTTC) with IPv4 and...

I have a spare HH5 and VDSL2 line and am happy ro flash it and test.

Is this problem not serious enough to warrant any attention? It is a blocker against adopting 22.03.

root@router:/# ethtool -k wan | grep vlan-o rx-vlan-offload: off [fixed] tx-vlan-offload: off [fixed] root@router:/# ethtool -k dsl0 | grep vlan-o rx-vlan-offload: off [fixed] tx-vlan-offload: off [fixed] root@router:/# ethtool -k dsl0.101...