welshcoder

Thanks for getting back to me. The receiver in this case is a Teensy 4.1 with an isolated RS485 interface to the DMX connector. I'm using the TeensyDMX library to...

Sure, no problem. 1. Version 1.156 2. Both are using the version available through PlatformIO library manager: version 4.3.0-snapshot? 3. Here is the complete DMX setup and loop sections in...

Hopefully, I'll get a chance to try out the code tonight and let you know how it goes. In the meantime, the answer to your questions are: 1. I wrote...

Ok, got some captures from the scope with and without the glitching. In all the captures, the yellow trace is the DMX stream, and the blue(ish) trace is the USB...

Sorry for the delay in getting back to you, it's been a rather busy couple of days for me. There are a few things to cover here, so I'll try...

Just some extra info on this. I've been trying to see how the TeensyDMX library works with the SmartMatrix one, and I've captured some data here: https://gist.github.com/welshcoder/c994c9ca2ba84acc634edfa1db52fa61 This will need...

I've been looking at this issue this morning, and I've concluded the issue seems to be with the `Lock` process in the Receiver class. I was trying to figure out...

> Just to make sure I understand: even with your fix, you still sometimes see an issue on the receiver side? Yes, that's right, but the difference was that I...

No problem at all! I like your library, so I'd like to contribute what I can! :-) > Question: with that 30-minute glitch you mention, does it still occur even...

Well, I've spent a bit of time commenting out bits of code, adding `Serial.print`s and looking around various bits and pieces, and I think I've managed to remove that 30...