Erwin (de F/PE3ES)

I absolutely agree !

Maybe also check your OpenGL version. I had kind of the same issue on an older laptop HP 2540p with SDR++ as that needs OpenGL 3.0 or higher and now...

Not when this is not a mentioned dependency ;-) Will try and redo But now the question is: What do I need to de-install, clean or delete before redoing the...

Built from source, suggestions for the instructions to make them more helpful for people like me in the attached file, now works with my Pluto+ (Adalm Pluto clone). [SigDigger-extended build...

I am debugging the changes I did for this question. I am stuck though. Sending the same ipfix wrapped data to the pskreporter test port at 14739 does not give...

Upon further study I see I interpreted the C-code wrong. memcpy() is creating the buffer with the ipfix data sendto() is used to copy the buffer to pskreporter at ip:port...

Moving slowly, the 2 data files are different in more fields. Time and Freq differences are critical.   | FT8 | WSPR time | 131000 | 1448 dt | 0.23 |...

Solution works, needed some finetuning so as to not miss spots when the decoder is still working and the uploader starts. Done. 

As far as I can tell no change from previous situation. ***@***.***:~/Documents/apio$ lsapio.ini  icestick  leds.pcf  leds_tb.gtkw  leds_tb.v  ***@***.***:~/Documents/apio$ apio verify(DEBUG) Profile path: /home/erwin/.apio/profile.json(DEBUG) Home_dir: /home/erwin/.apioError: package 'oss-cad-suite' is not installedPlease...

I worked around this by having my credentials ready for the home SSID and inputting some fake data for the MQTT fields 3 and 4 because you can not save...