AccelStepper
AccelStepper copied to clipboard
waspinator
Fork of AccelStepper
I have a project running on an esp32 where I only need to move a motor every few minutes, and I'm using deep sleep to reduce the power consumption. However,...
I saw in another issue that AccelStepper was compatible with A4988 drivers. The Grbl shield uses these drivers, so I would like to know if I can use this library...
Does this library support the RP2040? I could not find anything in the code that suggests it doesn't, but would prefer to have a solid answer. Thanks
Hello everyone. I would like to stop the stepper motor immediately after the limit switch has been triggered. If I call the `stop()` function, the stepper motor starts to decrease...
I tested the following sketch using a TB6600 on the Arduino UNO R3, R4 Minima, and R4 WIFI. The R3 works perfectly, but the R4 boards do not. The motor...
[test Stepper.txt](https://github.com/waspinator/AccelStepper/files/4405305/test.Stepper.txt) Hi, I'm using the library with a Stepper driver (only use Pulse pin and Dir pin). I'm running an example (one revolution forward, one revolution reverse). I notice...
I would like to use it with DRV8825 or with an A4988. Thanks so much for the software
I have changed the Run function, so when the runSpeed returns false the Run Function returns false as well.
