vladtsit
vladtsit
It was latest lite OS image for RPI3. Finally I was able to setup everything on legacy OS image, what is raspbian buster. May be some incompatibilities with newest OS...
Thank you. EspHap_ThermostatControl work seamlessly, but I need only Heater, without Cooling features. I believe that appropriate device exists as HEATER_COOLER, but not supported by you. Do you have some...
I even modified you code and added heater_cooler, but seems something goes wrong - device appears in Homekit but only showing temperature, not showing controls. homeintegration.c: ``` //heater service homekit_service_t*...
your sample is working perfectly, but I need different accessory to be implemented which is Heater, not thermostat
``` /** Defines that the accessory contains a heater and/or cooler. Accessory Category: - 20: Heaters - 21: Air Conditioners Required Characteristics: - ACTIVE - CURRENT_TEMPERATURE - CURRENT_HEATER_COOLER_STATE - TARGET_HEATER_COOLER_STATE...
seems I did it, above *HEATING_COOLING* needs to changes to *HEATER_COOLER*
Thanks for recommendation, finally I found simpler way to reach required result by modifying library and thermostat sample. What I need - to restrict values of CURRENT_HEATING_COOLING_STATE and TARGET_HEATING_COOLING_STATE to...
thank you! Also, if possible, please allow to remove not required characteristics. For example, in my scenario I do not need thresholds.
Homebridge up and running and latest version
no this is 0.0.72 installed from inside of node-red. Il'' upgrade and come back with feedback. Thanks