Damien Cauquil

Use the same approach as Sniffle's when target BDADDR is provided (i.e. follow advertisements along channels 37, 38 and 39) and wait for connection requests on each of them.

Implement a mechanism to recover channel map update by sniffing

1

Channel map update recovery based on channel mapping can take some time, and sometimes this process fails and give the user no other way to synchronize btlejack with an existing...

Rework tv-b-gone code to support the upcoming ESP-IDF v5.x

Implement a wardriving feature that logs every access point found to the uSD card in a usable format (pcap ?)

WPA handshakes capture

1

Capture WPA2 handshakes and save on uSD card.

See forums.raspberrypi.com/viewtopic.php?t=87807 for more info.

Add Renesas RH850 architecture support

20

Hello, This PR adds support for the Renesas RH850 architecture and has been tested against different firmware files designed for the Renesas F1KM-S4 development board. This implementation supports all instructions...

Question about STM32WLxx support

7

I am currently working on adding support for the STM32WLxx family MCUs into libopencm3, especially the STM32WL55 and STM32WLE5 variants. Since these MCUs have sub-GHz integrated transceivers (LoRa/FSK/MSK/BSK/Sigfox capable), I...

Pushing a button when GRBL is in idle state allows the tool head to come to the center of X axis and let the user change any tool. Another push...

InkCut project need to be modified in order to allow tool and material selection for Cricut Maker. InkCut then uses these information to produce a custom GCODE (tool selection +...