Vincent Chov

I agree with @socketpair, I think that might help. Right now, my type checker doesn't even know that NDB() exists. See comment [here](https://github.com/svinota/pyroute2/discussions/880#discussioncomment-3850912)

Okay, thanks a lot! I'm having trouble connecting to the wifi AP when using an ESP8266. It keeps asking me for the password. I tried using the one hardcoded in...

Okay so I got it to compile on the ESP32 by removing the USB keyboard-related imports. I got it to stop crashing on-boot by changing the clock pin from GPIO...

Okay so I'm still having trouble. Can you please let me know if there are any specific challenges I should look out for? I've tried a few different configurations, but...

Ah I see. I'm very new to using oscilloscopes and had help from an electronics volunteer at my local makerspace who said they themselves were new to oscilloscopes. At any...

I really appreciate the help by the way! If I can get this to work, I plan on doing a write-up on my troubleshooting steps and provide a breadboard diagram...

Sorry, I don't think I understand what you mean when you say > The GND from the caliper is the USB cable shielding, not the black wire (-). The black...

Okay! I confirmed that I do have continuity between the metal body of the caliper and GND. I also have continuity between the caliper and the D+ and D- pins....

I just noticed that I don't get continuity between D+/D with GND when the calipers are disconnected. When the calipers are connected, I get continuity between D+/D and GND, presumably...

Good news, it's working now! There were two issues that we found: one related to shielding, and the other being that the D+/D- might be reversed compared to what the...