gridfinity_openscad
gridfinity_openscad copied to clipboard
vector76
Im using customized bin heights and not following the 7mm rule from Zack, is there any way of adjusting overall height like kennetek OpenSCAD desing so i can edit height...
I added a parameter to define the label height - default is 12mm This allows the use of smaller pTouch labels such as 9mm or 6mm Kept the extra 2mm...
Hi. I've made cups more flexible, so they can have sizes in increments of 0.5u.
I found the solution. I just had to download all files and open it from the extracted folder.... Close my issue, please. ********************************************************************************************* I freshly installed OpenSCAD version 2021.01. When...
It is based on the weighted version. I also changed the parameters to select the version to be a string that can be used in the customizer with a dropdown...
Currently, baseplates are only available in standard pitch. This also applies when "lid" option is checked. When bins are set half-pitch, stacking a larger lid to cover adjacent standard-pitch bins...
This caused me problems when I was playing around with the baseplate modules outside of the shipped xsize/ysize/if/else tree header at the top.
The Fingerslide radius is considerably smaller than what is on the original, making it difficult for my sausage fingers to slide a component up the side. Could I please request...
Trying to make a box with a flat top to then cut the shapes for my screwdrivers I noticed I can not fill the box completely, but the lip always...
When the Lip Style is set to either _none_ or _reduced_, it has an upturn at the ends which doesn't quite look right. It looks fine with the _normal_ Lip...