Anton Martinsen

Hi @saillingaway We do not officially support running it on Mac, but I have previously run the Exploration Tool on 2 different Macs. I believe the general process of installing...

Hello @saillingaway Yes sorry, I seem to have missed the"\\" in my correction. Running the command "python3 -m pip install --upgrade acconeer-exptool\\[app]" as you did should be the correct command....

Hello @saillingaway I did not really do any of those. But the first one with setting UART access, was handled through some GUI interface on Mac. Unfortunately I did not...

Hello @saillingaway You have pretty much covered the steps I took to run it now. The correct drivers seem to be installed and the backend libusb library seems to have...

@saillingaway Just to clarify, there is no pre-flashed binary on XM125, so if you have not managed to flash the Exploration Server binary on the XM125, we have to solve...

@saillingaway You can try downloading the Exploration Server binary for XM125 from our developer site then run the command: `python -m acconeer.exptool.flash flash -d XM125 -i acc_exploration_server_a121.bin` Before running this...

Hi @saillingaway > I tried downloading the binary and then running the command (ACCONEER XM125 EXPLORATION SERVER A121 from [this page](https://developer.acconeer.com/home/a121-docs-software/xm125-xe125/)) but unfortunately it seems like there's some trouble detecting...

Hi @mtntrx > 1. When the python Acconeer Exploration Tool (GUI) connects to the device, it is expecting the device to be OUT of DFU mode, correct? i.e. it's not...

Hello @ksenthurkumaran18052004 Are you using XE125 or have you used XM125 directly and try to make your own connecting board?

@sulaco67 There are two COM ports on XE125, try using both. Both are able to flash the module but only the enhanced COM port supports running the Exploration Tool. @trent-lane...