Žiga

PWM driven mosfet onstead of resistor (not an Issue)

8

Hi! Since in my packs built from used 18650 there is no use for small balancing currents as they are not all same capacity, I was wondering if you were...

Support for multiple inverter and JBD bms

1

Hi! Will there be any option for paralell inverter monitoring and support for JBD bms? Reagrds Žiga

Hi! I get this warnings and telnet neither mqtt work. `.pio\libdeps\esp01_1m\PubSubClient\src\PubSubClient.cpp: In member function 'boolean PubSubClient::publish_P(const char*, const uint8_t*, unsigned int, boolean)': .pio\libdeps\esp01_1m\PubSubClient\src\PubSubClient.cpp:523:16: warning: comparison of integer expressions of different...

Hi! It would be a nice option to read data of all inverters while connected to only one. Regards Žiga

BD2A20S150P can be interfaced using Modbus on the GPS port if protocol `JK RS485 V1.0` is enabled

3

Hello! I tested RS485 modbus communication on B2A20S150P and B6A20S150P bms and it works. If you select on bms under UART1 protocol 1(JK RS485 V1.0) and connect UART to RS485...