twiddern

It's also now working fine here with an Oneplus 3. 👍 I'll also test it against an access control system later, which wasn't working yet.

To be honest, I'm not 100% satisfied, still noticed some times, but very rare missing block when checking with my mobile. Also the access control system and vending machine still...

My experience until today, I'm able to clone cards and trick the system with a clone card (magic card, set my own card serial). However the system refuses the card...

Thanks for the mention, please give me some days time to verify it.

Hey @geo-rg, I'm sorry not yet. Haven't managed to flash the firmware yet and also not next week because of the #sha2017 event where I would be able to flash,...

@geo-rg I was finally able to test the latest firmware and it works good on my OnePlus3. However I noticed interruptions when there was not enough distance. 1cm distance is...

I was also aware of this before, however for me it's a pro because I can put it into a case and have an excellent signal quality ;)

You may could add an switch like **--ignore-cert-issue**s to the [install code](https://i1.wp.com/docs.hetrixtools.com/wp-content/uploads/2019/08/t4-1.png) window, that user can use during deployment. By default the certificate should be checked against local root-ca

Thanks for this, but something isn't correct working. Most country/flag information for RIPE countries are missing and if a flag is displayed, it's from a not RIPE serviced region.

I've found a public instance, might worth to take a look: https://as24904.kwaoo.net/as-stats/top.php It's slightly modified but: "that's it" The outdated presentation might be also interesting for you: https://neon1.net/as-stats/as-stats-presentation-swinog16.pdf