turboc1208
turboc1208
I found it. I had a firewall rule out of order causing it them to be blocked. Once I fixed that and reset them, they came back online just fine. ...
Has any progress been made on this? My wife was on a Zoom call for work when I added a new (Large) source. Oops. It would be nice if I...
from what SmartPhoneLover said, it sounds like all that is needed is to copy the files over to JellyFin.
I'm going to pile onto this with an example. I have an automation that turns on my ceiling fan when the temperature in the room gets above x degrees and...
I ended up running mjpg-streamer twice once for each input and putting each on a unique port. it's not ideal but I can watch my MK3 and MK4 now.
Ran into the same issue. Ended up just running mjpg_streamer twice one for each input and using a unique output port for each.
Any update on this? I've also noticed when the pi reboots or anytime I restart monitor there are about a doze copies of monitor.sh running based on a ps -ef...
Try just toggle: for the tap action. ``` tap_action toggle ```
Mosquito is the broker. It listens for and forwards messages to MQTT clients which are normally built into the device. You configure the device with the address of your broker...
+1 this, I am tracking the number of zwave devices on an electrical circuit in the house and then graphing the number of unresponsive devices. I need these to be...