Kris Bahnsen
Kris Bahnsen
Interesting. We've seen a similar oops at runtime if you cycle the interface down, up, then run a scan, repeatedly in a loop. The same NULL dereference and PC is...
> I use the WILC3000 in SPI mode, this configuration is defined in my dts file. > >  Your instantiation in your dts file is missing interrupt information. In...
The loop I was using to test is: while true; do ifconfig wlan0 down; ifconfig wlan0 up; iw dev wlan0 scan; done No 'sleep's and using 'iw' instead of 'wpa_cli'...
@mmader87 For what it's worth, we've seen this resolved in the latest driver and firmware version.
The main README.md of this repo, both master and dev branch, only list "BLE4.0"