Travis

Just wanted to check and see if this feature ever has gotten implemented? I currently don't see it working.  pip freeze | findstr plotly plotly==4.8.1 pip freeze | findstr...

@thewade and @geerlingguy I'm trying to get monitor mode working but I'm getting data from the be200. I can do tshark -i mon0 and see no packets captured. If I...

Odd, if wlan0 is up and connected then mon0 seems to be working.

@morrownr I'm using Raspberry Pi OS Lite, so just debian trixie with no desktop gui. I did recompile the kernel on target to see if it would fix it. Same...

Sadly the driver isn't loading so I'm not even seeing it in 'iw dev'. I have updated the firmware from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git But I finally did get it working after adding...

I do have a wifi 7 router. I'm able to connect to it ok it seems, but I did have to move it closer to the AP for it to...

```text $ iw dev wlan0 link Connected to 8c:30:66:72:50:08 (on wlan0) SSID: ##### freq: 6135.0 RX: 50664 bytes (208 packets) TX: 6916 bytes (48 packets) signal: -39 dBm rx bitrate:...