tomrow
tomrow
It can't find the game resources, make sure you have them and they're located properly in one of the specified folders and try again. You can get these files from...
I'll test it with an SDHC card and see if it improves, otherwise I'll reopen this issue
I tested this on an old 2DS with a 4GB card and it seems to run the same as my own system pre-overclock.
Game speed is 100% when level 2 cache is enabled using the Rosalina menu
It runs at 100% on New 3DS mode with 800Mhz clock and L2 cache. Both the overclock and the cache must be enabled, or slowdown will occur.
You will have to disable display scaling for this application. Go to the Compatibility tab of the joycon-driver.exe properties window and select "Change high DPI settings".
Unfortunately I don't know how to program in Go, so I can't give any code suggestions. Perhaps you could force the quantiazer to use a set palette, or perhaps change...
I was thinking something would have to give regarding my suggestions. By the way, what are the minimum requirements for this software in terms of CPU clock/RAM/ROM?
This is great! 2 and 4- bit modes have much higher contrast dark gray text now, rather than the odd oranges and blues of before.
I've yet to upgrade, I'll try soon.