todd-herbert

### Category Other ### Hardware Heltec Wireless Paper ### Firmware Version 2.2.24.b2ea1e23 ### Description 1. Erase flash 2. Build and upload for Heltec Wireless Paper 3. Disable smart position, decrease...

### Platform ESP32 ### Description After several minutes at idle, log gets message `[PowerFSM] Turning off screen`. After this point, the E-Ink display does not receive any updates until user...

Partial Refresh method causes Full Refresh instead

3

https://github.com/HelTecAutomation/e-ink/blob/5847ed8ff13e8ebe3dfd3ed6c68d10c5df1368d9/src/DEPG0290BxS75AFxX_BW.cpp#L223-L233 Tested on "2.9 Inch E-ink Display V2"

Possible issues uploading release zip

2

Full disclosure: I'm not entirely sure that I'm using this feature correctly. What I'm doing: * Visit http://flasher.meshtastic.org (tested both Chrome and MS Edge, Windows 10) * Select device (tested...

WIP: GPS tidy-up

31

In https://github.com/meshtastic/firmware/pull/4070 I said I'd follow up and have a go at tidying the GPS class, with the intention of then hunting down a bug affecting U-blox standby. I'm not...