SgtSaint
SgtSaint
Have you tried looking at the sample project? Seems like the best example: A working program.
Yet another example. Not hard to produce. Take any cylinder, vase, cup, sphere. Same values in 4.13.1 versus a version with Aracne engine like 5. Reported this during Aracne beta...
> The seam placement seems to actually be offset from the asked for coordinates. Model is centered, model is a Ø10 circular tube. The seam should appear centered in the...
> It's not rotated and in my understanding it does not care what orientation the part has. It simply uses the parts center as X0,Y0 instead of the buildplate 0....
> This is still happening in 5.1 and with 0.8mm nozzle, the seam is so large and messy it absolutely ruins the print. Remember you can have 4 & 5...
 Personal guess... Seam placement insists on disabling the option to even choose "none". Its insists on trying to place at "back". Which I suspect it looks for where the...
Hey @Cesinha1979 I'm getting some attention from them on this other ticket for the same problem. https://github.com/Ultimaker/Cura/issues/12800 Can you please - zip your Cura project file and attach it in...
So... Cura 5.1... Another example of not being able to get a straight seam on a circular object. simple funnel. No amount of playing with settings will get it to...
Some other observations. A part that is only 69mm size in the Y direction. Placed center of the bed. Seam location of x300, y-1000 gets a nearly straight seam. Seam...
 Personal guess... Seam placement insists on disabling the option to even choose "none". Its insists on trying to place at "back". Which I suspect it looks for where the...