tipofthesowrd
tipofthesowrd
I've a new Rainpoint sensor (labeled TCS005FRF. Which, according the info online should transmit on 433.9 MHz. However, I'm getting no useful info from the device. Also not when inserting...
With rtl_433 -R 195:vv -g 37 I'm getting some values, however very far from the required # bits. SNR doesn't seem to be the issue. I'm picking the TPMS values...
How can I switch channels? So far I've been unable to pickup anything, also not in gqrx or sdr#.
FWIW in my unit it's not a switch but a push button. When it's pushed for a few seconds a red light appears on the front for a few seconds
Mine is a pushbutton iso a switch to select a channel. Pressing the button does not give any indication there is any activity on 433 MHz. Upto now no values...
I'm recording some samples with no water and with the sensor fully in water to check if I pick up the sensor. I already attached the samples I have (the...
after capturing again some transmission I do think this is the correct device. I'm only picking up this transmission when the rainpoint is directly next to the SDR. The PDV...
I'm having the same issue, my cameras are displaying the same sensors. When checking in onvif device manager I clearly see the motion alarms firing.
As in right next to each other without antenna connected 🤣 Op vr 24 jun. 2022 03:51 schreef GarudaOne ***@***.***>: > after capturing again some transmission I do think this...
Unfortunately, no I have never made any progress in trying to get this to work. I believe some sort of 2way communcation is needed since I never saw any RF...