TM3D

Proposal: If abort is pressed, force auto home to reposition printhead when Z calibrate is restarted. Issue: In the case that the user aborts, the machine does not rehome. So,...

Update mcu.py to reduce Can Bus false timeouts

3

Increase timeout amount to avoid false timeouts with multiple mcus. ip -s link show can0 reports zero bytes, packets lost.

Increase timeout amount to avoid false timeouts with multiple mcus. ip -s link show can0 reports zero bytes, packets lost.

add touch feedback

6

This should not conflict with any KlipperScreen/master syntax and will keep Pad 7 touch feedback working. Untested on other devices with touch feedback.