thinhx2
thinhx2
 Try this one Vcap+gnd for reset . information from here : https://m.facebook.com/groups/1059092380768771/permalink/3428871193790866/
> HI, I'm using a different hardware and a different power supply solution to switch Vpp for the GAL (instead of the 5V/12V MT3608 module). Also my Hardware is a...
i have same problem with you
> Trên thực tế, bây giờ tôi thấy họ [xử lý các khoản bù đắp](https://github.com/sipeed/Longan_GD32VF_examples/blob/7fe21406e73dbe49e9aa3c5a9cd24a44af3b5f41/gd32v_lcd/src/lcd/lcd.c#L90-L96) . Chúng có lẽ chỉ nên là 25 và 0 cho bảng của bạn. Thank...
https://user-images.githubusercontent.com/16272934/112166094-eb095980-8c21-11eb-8fae-8d382fb4526a.mp4
Hello, yesterday i got stlink v2 clone and try to flash a stm8f103 breakout board i bought few week ago. I have same problem with all, chip protect,try exceeded, and...
> I also have some stm8s103f3 boards with un connected ground pins on the programming header. My solution: >  Did you scrape the blue paint on the copper layer?...
remove build_out folder and compile again