thijsdeschildre
thijsdeschildre
I can't get this to work with interrupts on an Arduino Nano (and Attiny85 ultimately). Software polling works. Starting with the example cocde, I defined the rotary encoder with pins...
STM32 ST-LINK Utility (STSW-LINK004) doesn't seem to work on Windows 10. I had the PCB's made, did an excellent job reflowing the PCB with solder paste, but couldn't connect with...
I was about to finalize an afternoon of selecting parts and placing them in the baskets across 4 different webshops. I only had to add basic resistors and used the...
I'm testing the software with autocomplete. I can make it work for 1K or 10K resistors, but not for values with a decimal. I tried entering 1.5K, 1,5k and 1K5....
Are there any requirements for the type of STM32F being used? Availability of these chips is still bad. From what I can see, it needs to support the SPI bus...
I've enabled debugging on the klicky macros and updated all my configs and macros to the latest version. During homing routine, the printer goes through the following status changes: it...
The MCU won't connect to MQTT. I can't figure out how to access or change the settings. After a lot of searching, I figured out the option "erase flash: all...
https://www.amesweb.info/Screws/IsoMetricScrewThread.aspx looks like it has been removed. The domain and other pages are still up.