thieren

> Looked at the log and from the behavior I'm guessing a UDP communication problem, because the P2P protocol relies on the client acknowledging receipt of a data packet, otherwise...

Unfortunately I am not much of an expert when it comes to network traffic sniffing. I have two physical network interfaces and four virtual network adapters from hyper-v on this...

> I think I have replicated this issue - I have been struggling for a few days to get the integration to work on Windows 11 & Hyper-V. It would...

> Hey I installed Homebridge on Hyper-V running on Windows 10 today (i run hoobs on a raspberry pi, and I really want to use this plugin!) and I think...

> @thieren @jasonwfrancis1 > > Could you try the following and see if that also solves the streaming problem? > > [bropat/eufy-security-ws#130 (comment)](https://github.com/bropat/eufy-security-ws/issues/130#issuecomment-1229479950) > > Let me know, please. Will...

> @thieren > > With Gen 2 VMs this fixes also the issue: > > `ethtool --offload eth0 rx off tx off` I can confirm this fixed it for me.

Just checked again. The tested command for T8420 in the PR worked for `main_sw_version: 2.0.4.8`. The new Error was reported for `main_sw_version: 1.0.0.35`.

@smitty078 Thx for checking. I too believe this to be the cause. I've created a PR to fix this: https://github.com/bropat/eufy-security-client/pull/217 Can you test this by any chance?

@smitty078 I think you're right. Checking against only the model should in theory resolve the issue just as well. As for why I used this approach: I did follow the...

Hi @royakaacky Maybe you've found this already, but there is literally another 'Documentation' issue on this repo: #1